Loading...
Architectural Plans Complete APPLICATIONS • Specification-grade luminaire providing superior uniformity and light control for parking areas, office parks, schools, and walkways. FEATURES • Architectural, one-piece die-cast aluminum housing with nominal .125” wall thickness. Contour lines and radius corners complete unique design. • Die-cast aluminum door hinges to housing and secures with two, captive screws. Clear, flat or convex, tempered glass lens seals to door and housing with one-piece silicone gasketing. • Specular, anodized aluminum reflectors for horizontal lamp, provide Type II, III, IV, or V square light patterns, and for vertical lamp provide Type IV or V square light patterns. Horizontal Type II, Type III, and vertical Type V reflectors feature unique, micro-faceted designs. IESNA full cutoff lighting classification achieved with flat lens. • Die-cast aluminum arm for pole mount features access door to facilitate installation. Wall mount available with cast aluminum bracket and arm. • Mogul porcelain socket, pulse rated, with spring-loaded, nickel-plated center contact and reinforced lamp grip screw shell. Medium base for ED-17 lamp. • 100-150w lag type, HPF ballast -20˚F (-40˚F for HPS). • 200w-400w CWA type, HPF ballast, starting rated at -20°F (-40°F for HPS). • Durable Lektrocote® TGIC thermoset polyester powder coat paint finish assures long life and maintenance-free service. LISTINGS/CERTIFICATIONS • UL1598 listed for outdoor use in wet locations. • IDA fixture seal of approval when configured with flat lens. MEDALLION 1 SERIES ORDERING INFORMATION ORDERING EXAMPLE: CM1-A5-P40-H3-F-Q-DB-L SPAULDING LIGHTING SHEET # MEDALLION1-SPEC7/10 A B C EPA Weight FLAT 16.0” 21.75” 10.0” 1.5 ft.2 35 lbs 406 mm 552 mm 254 mm 0.1 m2 15.9 kg CONVEX 16.0” 21.75” 13.25” 1.6 ft.2 37 lbs 406 mm 552 mm 337 mm 0.2 m2 16k kg NOTE: EPA and weight values do not include mounting arm 5” and 6” arms add 0.22 ft.2 EPA and 4lbs. 10” arm adds 0.44 ft.2 EPA and 5.5lbs. See back page for shielded values. Cat. # Job Type Approvals -------Source/Wattage Series Mounting Lamp Orientation/Distribution Lens Voltage Color Options SERIES CM1 Medallion 1 Series MOUNT A5 Arm Mount (incl. 5” rigid arm) not acceptable for 90° configurations) A10 Arm Mount (incl. 10” rigid arm)7 AD6 Decorative Arm Mount (includes 6” decorative upswept arm, not acceptable for 90° configurations) WBA5 Wall Bracket Construction with 5” straight arm WBA10 Wall Bracket Construction with 10” straight arm WBAD6 Wall Bracket Construction with 6” decorative upswept arm MAF Mast Arm Fitter (for 23⁄8” OD horizontal mast arm) 0 No arm or wall bracket (only order w/o arm or wall bracket when mounting component is ordered as an accessory) WATTAGE/SOURCE PULSE START METAL HALIDE P10 100 watt (ED-17) P12 125 watt (ED-17) P15 150 watt (ED-28)1 P17 175 watt (ED-28)1,2 P20 200 watt (T-15)1 P25 250 watt (ED-28) P32 320 watt (ED-28) P35 350 watt (ED-28) P40 400 watt (ED-28) HIGH PRESSURE SODIUM S10 100 watt (ED-23.5)1 S15 150 watt (ED-23.5)1 S25 250 watt (ED-18) S40 400 watt (ED-18) LAMP ORIENTATION/DISTRIBUTION H2 Horizontal II -multi-faceted hydroformed H3 Horizontal III -multi-faceted hydroformed H4 Horizontal IV -multi-piece H5 Horizontal V (square) hydroformed V4 Vertical IV -multi-piece V5 Vertical V (square) -multi-faceted hydroformed LENS F Flat3 C Convex2 R Convex Quick Release6 VOLTAGE Q Quad-Tap® -120/208/240/277V4 5 480V5 T Tri-Tap® -120/277/347V4 CSA COLOR DB Dark Bronze BL Black WH White GR Gray PS Platinum Silver RD Red (premium color) FG Forest Green (premium color) CC Custom Color (consult factory) OPTIONS F1 Fusing -120V F2 Fusing -208V F3 Fusing -240V F4 Fusing -277V F5 Fusing -480V F6 Fusing -347V P1 Photo Button -120V P2 Photo Button -208V P3 Photo Button -240V P4 Photo Button -277V P6 Photo Button -347V PR1 Photo Cell Receptacle -120V PR2 Photo Cell Receptacle -208V PR3 Photo Cell Receptacle -240V PR4 Photo Cell Receptacle -277V PR5 Photo Cell Receptacle -480V PR6 Photo Cell Receptacle -347V RPA2 Round Pole Adapter (23⁄4”-31⁄8”) RPA3 Round Pole Adapter (31⁄4”-33⁄4”) RPA4 Round Pole Adapter (37⁄8”-41⁄2”) RPA5 Round Pole Adapter (5”) RPA6 Round Pole Adapter (6”) QZ Quartz Restrike with lamp HS Internal House Side Shield RP Removable Powr-Panl® TL Touch Latch -tool-free entry (not for ground relamping) VG Polycarbonate Vandal Guard L Lamp 1 Must use ED-17 lamp for vertical orientation with flat lens. 2 Vertical lamp only. 3 Vertically lamped units available with medium base ED-17 lamps up to 200w PSMH and 150w HPS. 4 Factory wired for highest voltage unless specified. 5 Not available with 100w Pulse Start MH lamp. 6 V4 configurations only for ground relamping. Includes door retention device. We do not offer light changer pole. 7 Required for 90° configurations. B A CC Copyright © 2010 SPAULDING LIGHTING All Rights Reserved MEDALLION1-SPEC12/10 Printed in USA Spaulding Lighting • 701 Millennium Drive • Greenville, SC 29607 • phone: 864-678-1000 For more information visit our web site: www.spauldinglighting.com Due to our continued efforts to improve our products, product specifications are subject to change without notice. ORDERING INFORMATION #2 DRILL PATTERN FOR POLES POLE TOP .875 Ø .875 HOLE 2.25 3.5 Ø .563 2 HOLES STANDARD ARM DETAIL CAST ADAPTOR ROUND A . ARM MOUNTING INSTALLATION FOR SQUARE AND ROUND POLES POLE COVER SQUARE AND ROUND POLES SQUARE POLE NUT PLATE FIGURE 1 (PATTERN END) HOUSING (3-HOLE ARM TO SQ. POLE COVER FLAT WASHER LOCKWASHER HEX NUT BOLTS FROM INSIDE FIXTURE ARM COVER LOCKWASHER FLATWASHER SCREW GASKET ACCESSORIES (order as separate part #) Catalog Number Description TPLB-XX1,2 Twin Parallel Luminaire Bracket CM1-EHS-XX2 External House Side Shield MAF-CM-XX2 Bracket for 23/8” OD horizontal mast arm SETA-XX2 Square Pole Tenon Adapter (4 @90°) (23/8”-27/8” OD tenon) RETA-XX2 Round Pole Tenon Adapter (4 @90°) (23/8”-27/8” OD tenon) (REQUIRES 4” ROUND POLE ADAPTER) TETA-XX2 Hexagonal Pole Tenon Adapter (3 @120°) (23/8”-27/8” OD tenon) PTL-1 Photocontrol -Twist-Lock® Cell (120V) PTL-8 Photocontrol -Twist-Lock® Cell (120-277V) PTL-5 Photocontrol -Twist-Lock® Cell (480V) PTL-6 Photocontrol -Twist-Lock® Cell (347V) PSC Shorting Cap -Twist-Lock® 1 Arms, luminaires, and pole not included. 2 Replace XX with color choice, eg: DB for Dark Bronze. TPLB-XX twin parallel luminaire bracket EPA = 2.3 ft2 (4.9 ft2 with two CM1 luminaires mounted with 5” arms) SPECIFICATIONS HOUSING Single-piece die cast aluminum alloy housing having a smooth surface appearance and nominal 0.125” wall thickness for rigid structural support, durability, and heat dissipation of electrical components. Featuring a two-tiered rectilinear housing, arched top, and vertically oriented side ribbing, all corners and edges have a radius corner design. Integral doorframe hinges remain inconspicuous in appearance. Nominal housing dimensions of 16” W x 21.75” L x 10” D (convex lens adds 3.25” depth). Housing to accept optional Twist-Lock® and button-style photocell control equipment. Powder paint finishes standard. DOOR/LENS Single-piece die cast aluminum alloy doorframe having a smooth surface appearance and nominal 0.125” wall thickness for rigid structural support and durability. Radius doorframe edge smoothly transitions luminaire housing sides to the bottom of the doorframe enclosure. The doorframe assembly remains captive to the housing as it hinges toward the rear of the luminaire when opened for servicing, however can be easily removed. The door assembly when closed fastens to the housing utilizing four points of contact consisting of two corrosion-resistant screws and two inconspicuous integral die cast aluminum hinges. Tool-free touch latch entry available which includes ground re-lamping access on vertically lamped units. Doorframe closure creates positive compression of single-piece silicone gasket. Clear tempered glass enclosure available in both flat and convex designs, which seal to the doorframe with a single-piece silicone gasket. Available doorframe accessories include a three-sided external house side shield (rotatable and painted to match housing color) and clear polycarbonate shielding for glass protection. Powder paint finishes standard. MOUNTING Single piece die-cast aluminum alloy rigid straight arm having a smooth surface appearance features an arched top and horizontal contour lines to complement the luminaire housing design. Available in both 5” and 10” lengths, all mounting hardware is concealed within the arm assembly and is accessible from an inconspicuous removable door on the lower portion of the casting. The decorative upswept cast aluminum arm features an arched top, 3.25” rise over a 6” length, and removable door on the lower portion of the casting. Luminaire and arm mounting hardware includes 1/2” diameter grade 5 bolts. Multiple cast aluminum adapters are available for for round poles ranging from 23/4” to 6” in diameter. Wall plate bracket and mast arm fitter for horizontal 23/8” OD pipe also available. All mounting components include gasket material to seal between the luminaire housing and mounting accessory. Powder paint finishes standard. OPTICS Available reflectors include both horizontal and vertically lamped versions. Horizontal configurations include IES type II, III, IV, and V-square distributions and feature a flat lens. Vertical configurations include IES type IV, and V-square distributions and feature a convex lens. IES type V distribution available with flat lens up to 200 watts in select lamp sources (see catalog logic). Flat lens design meets IES Full Cutoff classification standards. Internal and external house side shielding also available. ELECTRICAL Available HID wattage range of 100 to 400 watts from Metal Halide, Pulse Start Metal Halide, High Output Super Metal Halide, and High Pressure Sodium sources. Optional removable Powr-Panl® to contain quick connects on both ballast and socket leads. Additional options include fusing, photocell cell control, and a quartz restrike lamp. FINISH TGIC thermoset polyester powder paint finish applied at nominal 2.5-mil thickness. Prior to painting all luminaires and mounting accessories should be thoroughly cleaned with acid and alkaline cleaners followed by the application of a chromate conversion coating. LISTING/CERTIFICATION UL1598 approved for outdoor use in wet locations. 45.5” SHIELDED EPA VALUES Configuration Arm Length 5”/6” 10” Single 1.7 ft2 1.9 ft2 2 at 900 N/A 2.8 ft2 2 at 1800 3.4 ft2 3.8 ft2 3 at 900 N/A 4.5 ft2 3 at 1200 4.3 ft2 4.5 ft2 4 at 900 N/A 4.5 ft2 Convex lens adds 0.1ft 2 EPA for single configurations, 0.2ft 2 for doubles, 0.3ft 2 for triples and quads. MAF-CM-XX bracket for 23/8” OD horizontal mast arm CM1-EHS-XX external house side shield EPA = 0.57 ft 2 Copyright © 2010 spaulding lighting All Rights Reserved medallion1-spec7/10 Printed in USA Spaulding Lighting • 701 Millennium Drive • Greenville, SC 29607 • phone: 864-678-1000 For more information visit our web site: www.spauldinglighting.com Due to our continued efforts to improve our products, product specifications are subject to change without notice. accessoriesPole adapters ARM-C-5-S-XX 5” rigid straight arm ARM-C-10-S-XX 10” rigid straight arm ARM-CRD-6-S-XX 6” rigid upswept arm CRD-RPA2-pole adapter for straight and upswept arm (2-3/4” to 3-1/8” dia. pole) CRD-RPA3-pole adapter for straight and upswept arm (3-1/4” to 3-3/4” dia. pole) CRD-RPA4-pole adapter for straight and upswept arm (3-7/8” to 4-1/2” dia. pole) CRD-RPA5-pole adapter for straight and upswept arm (5” dia. pole) CRD-RPA6-pole adapter for straight and upswept arm (6” dia. pole) sss-490-xx2 Square Pole Tenon Adapter (4 @90°) (23/8”-27/8” OD tenon) rss-490-xx2 Round Pole Tenon Adapter (4 @90°) (23/8”-27/8” OD tenon) (requires 4” round round pole adapter) rss-3120-xx2 Round Pole Tenon Adapter (3 @120°) (23/8”-27/8” OD tenon) (requires 4” round pole adapter) WB-CR-XX Wall bracket MAf-CM-XX Horizontal mast arm fitter for 2-3/8” OD mast arm TPLB-XX Twin parallel luminaire bracket 8914527 CM1 internal house side shield CR1-PVG Polycarbonate vandal shield CM1-EHS-XX External house side (EPA = .57) PTL-1 (must use PCR (X) option) Photocontrol -Twistlock cell (120V) PTL-8 (must use PCR (X) option) Photocontrol -Twistlock cell (120, 208, 240, 277V) PTL-5 (must use PCR (X) option) Photocontrol -Twistlock cell (480V) PTL-6 (must use PCR (X) option) Photocontrol -Twistlock cell (347V) PSC (must use PCR (X) option) Shorting Cap -Twistlock AADM-XX Adjustable arm, direct mount SPECIFICATIONS Intended Use: Full cutoff perimeter or entry lighting for 10-15ft mounting heights that require high light output and maximum energy efficiency. Laredo LMC LED provides low installation costs with little or no maintenance and great energy savings. Ideal for schools, factories, hospitals, warehouses and retail applications. Construction: Decorative die cast aluminum housing and door. Rugged design protects internal components and provides excellent thermal management for long life. 70% lumen maintenance at 50,000 hours minimum. 800 series powder paint finishes provide lasting appearance in outdoor environments. Five standard finishes include: Bronze, Black, Gray, White and Platinum. Multiple options customize including a tool-free latch, which allows re-lamping of HID units from the ground, photocontrol for energy savings, intregral ballast back-up battery for fluorescent units, fusing, quartz standby and EM sockets for remote power, lamps and five standard finishes. Optics: LED: 18 High Power Power LEDs deliver 2039 lumens and combination of optical lenses and reflectors deliver light in a rectangular pattern with better than 3 to 1 max to min uniformity. 5000K/70 CRI LEDs provide excellent color rendition at 46 lumens per watt. HID/CFL: Vertical lamp position (lamp is optional on HID and CFL units) provides maximum HID performance and life. Standard, removable front shield on single lamp units, reduces forward beam projection while maintaining lateral throw, if desired. Distribution: Full cutoff distribution -flat glass and optics provide wide spread with an environmentally friendly light control. IDA compliant. Electrical: Wide selection of wattage and sources including LED, pulse start electronic metal halide and fluorescent systems (see below). LED Amp Draw: 0.4 AMPS max Optional battery for emergency egress – 120V or 277V – provides 90 minutes/615 lumens Installation: Three 1/2” conduit hubs (top and sides), allow feed-thru surface wiring capability on HID and CFL units. Foam gasket for sealing to smooth surfaces with two or three key slot configuration. Mounting template included. LED units, designed with quick mount system to provide rigid mounting over recessed junction boxes – fixture does not require opening for mounting. Listings: Listed and labeled to UL 1598 for wet locations, 25˚ C ambient environments. U.S. Patent No. D563,587 Limited Warranty: One year HID & CFL, 5 years LED LAREDO SERIES LMC SERIES Cat.# Approvals Job Type Outdoor Lighting ORDERING INFORMATION ORDERING EXAMPLE: LMC-150P 8-1-TL LMC ---Series Wattage/Source/Voltag e Finish Options HUBBELL OUTDOOR LIGHTING WWW.HUBBELLOUTDOOR.COM 2/11 SERIES LMC Laredo Medium Cutoff WATTAGE/SOURCE/VOLTAGE LED* 18LU-5K 44.5w Universal Voltage 120-277V PULSE START METAL HALIDE 50P 9 50w 120/277V Dual Volt 70P 8 70w Quad-Tap® 120, 208, 240, 277V 70P 6 70w Tri-Tap® 120, 277, 347V 100P 8 100w Quad-Tap® 120, 208, 240, 277V 100P 6 100w Tri-Tap® 120, 277, 347V 100P 5 100w 480V 150P 8 150w Quad-Tap® 120, 208, 240, 277V 150P 6 150w Tri-Tap® 120, 277, 347V 150P 5 150w 480V WATTAGE/SOURCE/VOLTAGE ELECTRONIC METAL HALIDE 70E6 8 70w Quad-Tap® 120, 208, 240, 277V 100E6 8 100w Quad-Tap® 120, 208, 240, 277V ELECTRONIC FLUORESCENT 42F6 8 42w Quad-Tap® 120, 208, 240, 277V 84F5,6 8 84w Quad-Tap® 120, 208, 240, 277V HIGH PRESSURE SODIUM 70S 8 70w Quad-Tap® 120, 208, 240, 277V 70S 6 70w Tri-Tap® 120, 277, 347V 150S 8 150w Quad-Tap® 120, 208, 240, 277V 150S 6 150w Tri-Tap® 120, 277, 347V 150S 5 480V FINISH 1 Bronze 2 Black 3 Gray 4 White 5 Platinum OPTIONS PC(X) Button Photocontrol replace X with voltage, specify 1-120V, 2-208V, 3-240V, 4-277V TL7 Touch Latch, Tool-free Entry LP2 Lamp Included F(X)7 Fusing replace X with voltage, 1-120V, 2-208V, 3-240V, 4-277V QST 7 Time Delay Quartz stand by system less lamp EM3,7 DC Bayonet Socket (for remote power by others) EM123,7 MR11/MR16 Two Pin Socket (for 12V power by others) 2EM123,7 Two MR11 or MR16 Two Pin Sockets (for 12V power by others) BBU-XXX4,7 Emergency Battery Back-up, rated -4˚F, 120 or 277V BOC-XXX7 Emergency Battery Back-up, rated -0˚C, 120 or 277V BOC-LED(X) Emergency Battery providing 615 lumens for egress specify 1-120V or 4-277V A B C 16.0” 12.125” 9.0” (406 mm) (308 mm) (229 mm) B C A LED SYSTEM *LED 18 LEDs, 44.5watts, 2039 lumens out of fixture, 5000K color, 70 CRI 1 ‘0’ in voltage selection indicates less ballast. 2 For ‘Lamp included’ option on fluorescent: indicate desired wattage: 42F -LP42, LP32, LP26; 84F -LP84 (2x42w), LP64 (2x32w), LP52 (2x26w). 3 Lamps not included. 4 BBU option provides integral emergency battery back up and operates one fluorescent lamp at up to 1250 lumens for a minimum of 90 minutes. Operation is reliable between -4°F and +131°F. Maximum output is achieved when the lamp temperature is 77°F. Eliminates the need for remote batteries or additional fixtures. On two lamp units (2x26w, 2x32w, 2x42w) battery powers one lamp to 1250 lumens. 5 Two lamp fluorescent units have two electronic ballasts. Field wiring can provide switching for 50% fixture output if desired. 6 50Hz/60Hz standard on electronic MH, Fluorescent or LED. 7 Not available LED or two lamp CFL versions PHOTOMETRICS Unit Description IES File # 18 LED – Clear Lens LMC-18LU-5K.IES 150w Pulse Start with Shield LMC-150P-CS.IES 150w Pulse Start -Shield removed LMC-150P.IES 100w Pulse Start with Shield* LMC-100P-CS.IES 100w Pulse Start -Shield removed* LMC-100P.IES 70w Pulse Start with Shield* LMC-70P-CS.IES 70w Pulse Start -Shield removed* LMC-70P.IES 150w HPS with Shield LMC-150S-CS.IES 150w HPS -Shield removed LMC-150S.IES 42w Fluorescent with Shield LMC-42F-CS.IES 42w Fluorescent -Shield removed LMC-42F.IES 2x42w Fluorescent -no Shield LMC-84F.IES *Output for magnetic pulse start or electronic ballast. ACCESSORIES (order as separate part number) LMC-SPC Polycarbonate shield (.125 thickness) PBT-1 120V button photocontrol PBT-234 208/240/277V button photocontrol REPLACEMENT PART 7737101 Polycarbonate Lens HUBBELL OUTDOOR LIGHTING WWW.HUBBELLOUTDOOR.COM 2/11