Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
kl_bounce_spec
© 2012 KIM LIGHTING INC.• P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 BNS1 Bounce® revision 10/24/12 • kl_bounce_spec.pdf Approvals:Type: Job: Catalog number: Specifications Date: Page: 1 of 5 / // / Mtg. Fixture Electrical Module Finish Options See pages 4 - 5 Hood and Lens Frame:Die-cast, low copper (<0.6% Cu) aluminum alloy hood and lens frame with stainless steel hinge. The hood is opened with a tool-less latch made of die-cast aluminum and stainless steel brackets. The hood is held open for relamping with a stainless steel wire self-locking stop arm. The F"thick clear flat or convex tempered glass lens seals against the reflector flange by a one-piece molded silicone gasket, to produce a fully sealed optical chamber. The underside of the hood is always painted white. Reflector Module:Specular Alzak®optical segments are rigidly mounted within an aluminum enclosure (die-cast for horizontal, spun for vertical) which attach to the hood as a one-piece module with four captive screws. The 4KV, medium base socket is factory prewired with a high temperature quick-disconnect plug. The wires pass through a silicone gasket to maintain sealed optical chamber integrity. Ballast Chamber:Die-cast, low copper (<0.6% Cu)aluminum alloy flanges compress a ribbed extruded aluminum chamber. The die-cast aluminum cover is held with two captive stainless steel screws and a retaining wire is provided to secure the cover during installation or servicing. The four heavy wall extruded support rods are mechanically fastened to the lens frame with stainless steel fasteners. The support rods are held in position through die-cast arms and mechanically fastened at the bottom with a custom aluminum bolt. The electrical wiring is channeled through a support rod with an aluminum bushing. The die-cast cover is always painted reflective white. (Optional Black Ballast Cover). Mounted by one of the following pole attachment means: FM - Flush Mounting by means of an expansion device activated by a single bolt within the ballast compartment. Pole must have a plain-cut top. Standard pole size is 4"O.D. (Other pole adapter sizes available; contact Kim representative). PT - Pole Tenon mounting by means of a cast aluminum adapter containing four recessed C"stainless steel allen head set screws. Pole must have a 2"pipe-size tenon (2C" O.D. x 4K"minimum length). Pole tenon must be field drilled at one set screw location to secure against fixture rotation. Electrical Module:All electrical components are UL and CSA recognized mounted on a single bracket and factory prewired to a main power disconnect plug. The power quick-disconnect plugs are glass-filled thermoplastic, self aligning, and rated for 10,000 matings. The male portion of the plug is mounted to the ballast bracket and the female portion is mounted to the bottom die-cast flange section. Wires are supplied to reach the pole hand hole. Power to the ballast disconnects when the bracket is pulled out. All ballasts are high power factor with starting temperatures of -40°F for HPS and -20°F for PMH lamp modes. Finish:Super TGIC thermoset polyester powder coat paint, 2.5 mil nominal thickness, applied over a titanated zirconium conversion coating; 2500 hour salt spray test endurance rating. Standard colors are Black, Dark Bronze, Light Gray, Stealth Gray™, Platinum Silver, or White. Custom colors are available. CAUTION:Fixtures must be grounded in accordance with national, state, and/or local codes. Failure to do so may result in serious personal injury. Horizontal Lamp 70 to 150 watt Medium Base Lamps 16" DIA. (406.4 mm) 31J" (793.8 mm) 5" DIA. (127.0 mm)13B" (333.4 mm) 31" DIA. (787.4 mm) 24D" (625.5 mm) 6K" (165.1 mm) 13K" (342.9.mm) Vertical Lamp 70 to 200 watt Medium Base Lamps 31" DIA. (787.4 mm) 16" DIA. (406.4 mm) 6K" (165.1 mm) 31J" (793.8 mm) 24D" (625.5 mm) 13K" (342.9.mm) 13B" (333.4 mm) 5" DIA. (127.0 mm) See page 2 See page 3 U.S. Patent D473,333S Listings and Ratings UL cUL 15981 IP66 Rated 25C Ambient 1 Suitable for wet locations. KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE. © 2012 KIM LIGHTING INC.• P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 BNS1 Bounce® revision 10/24/12 • kl_bounce_spec.pdf Page: 2 of 5 Type: Job: Standard Features Horizontal Lamp Flat Glass Lens Vertical Lamp Convex Glass Lens Light Distribution:Asymmetric Symmetric Square Cat. No.:BNS1F3 BNS1F5 Fixture Cat. No. designates BNS1 and light distribution. See the Kim Site/Roadway Optical Systems Catalog for detailed information on reflector design and application. Mounting Plan View EPA:1.2 1.2 Cat. No:FM Flush Mount PT Pole Tenon Mount Pole Top Requirements: 4" O.D. Poles only 2"Pipe-size Tenon (2C"O.D. x 4K"min. length) EPA:3.6 n/a Cat. No:2SB Twin Mount 1W Wall Mount Pole Top Requirements: 4" or 5"O.D. Poles only n/a Light Distribution:Type I Type II Type III Type IV Type V Forward Throw Square Full Cutoff Full Cutoff Full Cutoff Full Cutoff Full Cutoff Cat. No.:BNS1H1 BNS1H2 BNS1H3 BNS1H4 BNS1H5 © 2012 KIM LIGHTING INC.• P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 BNS1 Bounce® revision 10/24/12 • kl_bounce_spec.pdf 70HPS120 100HPS120 150HPS120 70HPS208 100HPS208 150HPS208 70HPS240 100HPS240 150HPS240 70HPS277 100HPS277 150HPS277 70HPS347 100HPS347 150HPS347 70HPS4802 100HPS4802 150HPS4802 Lamp ED-17, Coated ED-17, Coated ED-17, Coated Socket Medium Base Medium Base Medium Base ANSI Ballast S-62 S-54 S-55 Type Electrical Module HPS = High Pressure Sodium PMH = Pulse Start Metal Halide Cat. Nos. for Electrical Modules available: Lamp Lamp Line Watts Type Volts 100 HPS 277 1 NOTE:Available with vertical lamp reflectors Type III and Type V only. Not for use in horizontal lamp reflectors. 2Check with local codes for use of medium base sockets with the 480 volt. 70PMH120 100PMH120 150PMH120 175PMH1201 200PMH1201 70PMH208 100PMH208 150PMH208 175PMH2081 200PMH2081 70PMH240 100PMH240 150PMH240 175PMH2401 200PMH2401 70PMH277 100PMH277 150PMH277 175PMH2771 200PMH2771 70PMH347 100PMH347 150PMH347 175PMH3471 200PMH3471 70PMH4802 100PMH4802 150PMH4802 175PMH4801,2 200PMH4801,2 Lamp ED-17, Coated ED-17, Coated ED-17, Coated ED-17, Coated ED-17, Coated Socket Medium Base Medium Base Medium Base Medium Base Medium Base ANSI Ballast M-98 M-90 M-102 M-137 M-136 Type Page: 3 of 5 Type: Job: Standard Features Finish Super TGIC powder coat paint over a titanated zirconium conversion coating. 3Custom colors subject to additional charges, minimum quantities and extended lead times. Consult representative. Custom color description: Color:Black Dark Bronze Light Gray Stealth Gray™Platinum Silver White Custom Color 3 Cat. No.:BL DB LG SG PS WH CC © 2012 KIM LIGHTING INC.• P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 BNS1 Bounce® revision 10/24/12 • kl_bounce_spec.pdf 6J" (158.8 mm) 11K" (292.1 mm)37K" (952.5 mm) 1J" (31.8 mm) CL CL 18" (457.2 mm) 4J" (108.0 m) 10D" (269.9 mm) 8L" (222.3 mm) 2L" (69.9 mm) N" (14.3 mm) 5K" (139.7 mm) Mounting Plate 39" (990.6 mm) 19K" (495.3 mm) CL C L C L 37K" (952.5 mm) Extruded aluminum arm is factory assembled, with internal concealed draw bolts, to an extruded aluminum fixture support riser and a cast aluminum wall cover plate. A cast aluminum wall mounting plate pre-attaches to wall with bolts (by others). Fixture riser has a cast aluminum bottom cap. Wall cover plate has a removable cast aluminum cover for field splice access. Complete arm assembly can be mounted before field splices are made. All components are mechanically attached with no visible welds or fasteners. All wall components are finished to match fixture. Two extruded aluminum arms are supplied with internal concealed draw bolts for attachment to Kim 4"and 5" O.D. poles with predrilled mounting holes. Arms are 180° apart, supplied with an internal pole reinforcing plate with wire strain relief and an extruded aluminum riser for mounting FM (Flush Mount) fixtures only. A cast aluminum pole cap and matching riser cap are included, and all components are mechanically fastened to eliminate welds and visible fasteners. All components are finished to match fixture. Wall Mounting Cat. No.1W Select from Mounting on page 2. Page: 4 of 5 Type: Job: Convex Glass Lens Photocell Control Twin Mounting Cat. No.2SB Select from Mounting on page 2. Photocell Control Cat. No.(See right) No Option The F"thick clear convex tempered glass lens replaces the standard flat glass lens in horizontal lamp fixtures. Provides increased lens presence and provides a subtle improvement in uniformity where pole spacing is extreme. NOTE:Convex lens is standard on all Vertical Lamp Optical Systems. Convex Glass Lens Cat. No.CGL No Option Convex Polycarbonate Lens One-piece vacuum formed, clear, UV stabilized convex polycarbonate, fully gasketed, replacing the standard tempered flat or convex glass lens. CAUTION:Use only when vandalism is anticipated to be high. Useful life of lens is limited by UV discoloration from sunlight and metal halide lamps. Convex Polycarbonate Lens Cat. No.CP No Option Factory installed fully gasketed sensor mounted in the hood. Optional Features Cat. No. Line Volts: Cat. No. Line Volts: A-30 120V A-33 277V A-31 208V A-35 347V A-32 240V A-34 480V © 2012 KIM LIGHTING INC.• P.O. BOX 60080, CITY OF INDUSTRY, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695 BNS1 Bounce® revision 10/24/12 • kl_bounce_spec.pdf Page: 5 of 5 Type: Job: High temperature fuse holders factory installed. Fuse is included. Line Volts: 120V 208V 240V 277V 347V 480V Cat. No.:SF DF DF SF SF DF (For Full Cutoff distributions).Replaces reflective white ballast cover with black ballast cover. For use in conjunction with black or dark bronze fixture finish and horizontal lamp optics utilizing a flat lens only. Eliminates indirect under-hood illumination and horizontal light distribution, to produce a full cutoff light distribution. For use with Black or Dark Bronze fixtures only. Fusing Cat. No.(See right) No Option Black Ballast Cover Cat. No.BBC No Option Optional Features Houseside Shield Cat. No.(See right) No Option (Types II, III, IV - Asymmetric distributions only). The cutoff horizontal reflectors are available with stamped aluminum louvers that pass streetside light and block houseside light, and a blackened panel added to the reflector to reduce houseside reflections. The vertical reflectors and horizontal reflectors with the optional convex lens are available with a formed aluminum shield that passes streetside light and blocks houseside light, and a blackened panel added to the reflector to reduce houseside reflections. HS for flat lens HSC for convex lens or polycarbonate lens Cat. No. HS Not for use with Type V (horizontal lamp) or symmetric (vertical lamp) light distributions. HSC For use with all fixtures with convex glass or polycarbonate lenses. Not for use with Type V or symmetric light distributions. Neighbor Friendly Shield Cat. No.NFS No Option (Type IV only) Stamped internal shield and blocking panels are used to direct and redirect lighting into a forward throw distribution. The amount of light directed and redirected toward the back of the liminaire is dramatically reduced to create extremely low glare behind the pole. Only available on the Type IV reflectors. NFS